Congratulations that Medpharm won Philipine tender of 45 units autoclaves.

This kind of autoclave is class N,benchtop type with horizontal hinge door.

We have 18L and 24L for your selection.

Welcome you inquiry us.

MD-T24J Desktop Fast Pressurized Steam Sterilizer is a mini medical sterilizing device. The sterilizer uses electric heater to heat the pure water, which was put in advance in the sterilization chamber. The pressurized steam generated meets the sterilization requirement and sterilizes the objects needing sterilization. The sterilizer is equipped with a pressure controller which can be preset at within the working pressure range of 0.07Mpa-0.2Mpa(10Psi~30Psi), the temperature could be 115℃~134℃(239℉-274℉). The sterilizer is also equipped with a timer to control the sterilization time. It can be preset at within 0~ 60 minutes according to sterilization requirement, also with the function of drying, and has heater overload protection and sterilization ending buzzer alarm functions. The sterilizer can be easily operated and is safe and reliable. The waste steam in sterilization chamber and safety valve is discharged into water tank of the sterilizer to ensure a clean and dry working environment.

This product is widely used in antisepsis and sterilization for medical dressing utensil, medicine, medical instruments, and etc. It is especially suitable for prompt sterilization of various kinds of operation instruments in urgent need as prompt supplementary to operation room of medical unit. It also can be used by enterprises and scientific research units as an idea device to carry out asepsis experiment.

The working environment and condition of the product:

1. environment temperature: 5~40℃
2. Relative humidity: ≤80%
3. Atmospheric pressure range: 86~106 KPa
4. Power supply:

AC220V±22V, 60Hz±1Hz ( should have ground lead)

Transport and storage environment and condition:

1. environment temperature: -10~50℃
2. Relative humidity: 10%~90%
3. Atmospheric pressure range: 50~106 KPa

This product equipped with safety valve, and will auto release when steam pressure over 0.22Mpa, when the temperature over 140℃(284℉), the power auto be cut-off double safety protection. It also equipped with water-off overheat protection, current overload power cut-off protection, and the sterilizer’s door safety interlock device, is a safe and reliable product.

II. Structure & Working principle

1. General structure

This product buildup by sterilize chamber, instrument plate, water tank and control system (fig.1)

1. Safety valve

2. Exhaust valve

3. Handle

4. Sterilization chamber

5. Door of sterilization chamber

6.Rotate handle

7.Opening handle

8.Instrument pla

9. Clip

10.Pressure meter 11.Control system

(fig.1)

2. Working principle

The sterilizer is designed by using gravity type pressurized steam sterilization principle. Put 0.6liter of distilled water into sterilization chamber, use electric heater to heat directly to produce pressurized steam. The pressurized steam act with microorganism on the objects to be sterilized to destroy its structure and reach the purpose of sterilization.